RCI International Convention Proceedings (2017) (Product Unavailable for Purchase)
RCI International Convention Proceedings (2017)
Proceedings of the RCI 32st International Convention & Trade Show
March 16-21, 2017| Hilton Anaheim | Anaheim, CA
Techniques for Predicting the Service Life of 55% Al-Zn Alloy-Coated Steel, Low-Slope SSR Systems
Rob Haddock and Ron Dutton
Below-Grade Waterproofing in Urban Areas
Paul Buccellato, RWC, REWC, AIA, FASTM; and Justin Hensehll, FAIA, FASTM
Proper Design, Installation, and Field Quality Control for Achieving a High-Performance Air Barrier System
Laverne Dalgleish
Peer Review: Effective, Efficient, and Educational
Andrea L. Baird, NCARB, PE, CCA, BECxP, LEED AP BD+C; Robert J. Kudder, PhD, SE, FASTM; and Carola M. Ceja, RRC, NCARB
Concrete Roof Pavers: Wind Uplift Aerodynamic Mechanisms and Design Guidelines - A Proposed Addition to ANSI/SPRI RP-4
Maryam Asghari Mooeghi, PhD; Thomas L. Smith, RRC, AIA, FSEI; Perter Irwin, Phd; and Arindam Gan Ghowdhury, PhD
RICOWI 2016 Hail Investigation Program: Preliminary Results
Richard F. Herzog, RRC, PE; and John Kouba
Avoiding Unforeseen Liability in the Dsign and Recommendations of Fall Protection Systems of Buildings
Kevin D. Ouellette, PE, CFE
In-Situ Measurement of Wind Performance of Roof Edge Systems
Dr. A Baskaran, PEng; Sudhakar Molleti; Tony Mallinger; and B. Martin-Perez
Reflective Roofing Research: The Influence of Roof Color on Adjacent Air and Surface Temperatures
Elizabeth Grant, RA, PhD; Kenneth Black; and Stephen Werre, PhD
Slate Roofing for Consutlants: What You Need to Know
Robert L. Fulmer; Douglas Fishburn, RRO, GRP; and Jeffrey S. Levine
A Comparison of Three Energey?Enclosure Retrofit Strategies
Martin Houston, AIA, LEEP AP
Laboratory and Field Testing Parametrers to Determine Concrete Crack Geometry and Polyurethane Grout Design
Chadi El Mohtar, PhD; and Jim Spiegel
Structural Assessment of Glass Retroration
Mark K. Schmidt, PE, SE; Stephen M. Morse, Phd; H. Scott Norville, PE, PhD, FASTM; and Jeffrey A. Caldwell, PE
Optimizing the Building Envelope With A BIM-Based Framework
Bill Coltzer, Jr., RRO, AIA; and Christian Ozburn, RA
Designer Choices and Responsibilites in ASTM C1063 and ASTM C926 Regarding Portland Cement Plaster Wall Claddings
Jeff Bowlsby, CCS, CCCA; and Lee Cope, PE
Reroofing Requirements in the 2015 International Codes
Michael D. Fischer
Critical Components of Welding Thermoplastic Membranes
Walter E. Brown, RRO, CDT, LEED GA, CSRP; and Helene Hardy Pierce, FRCI
Roof Uplift Testing: Review of APplicable Standards and Industry Practice
Jerry L. Abendroth, RRC, RWC, REWC, RBEC, RRO, CDT; and Matthew R. McElovgue, RWC, RRO, PE
George Washington's Other Resting Place: Restoring the Washington Equestrian Monument
Matthew C. Farmer, PE; and Rebecca Wong, PMP
Top Ten List: What Gets Metal Roof Designer in Trouble?
Brian Gardiner, FRCI, RRC, CCS; and Charlie Smith
Testing the Potential Synergy of Green Roof-Integrated Photovoltaics at the Unviersity of Toronoto Green Roof Innovation Testing (GRIT) Laboratory
Dalia El Helow; Jennifer Drake, PhD; and Liat Margolis
Remediating Building Envelope Walls: Drainage Plane Designs
Annie K. Low, AIA, LEED AP
Drone Surverying: 3-D Enabled Automation of Roofing and Building Envelope Structures
William Wilkins and Geoff Mitchell
Price: $5.00
Member Price: $5.00